Cruise control

FIXITMR

MECHANIC
9,990 POSTS

Yah, I think they did finally decide to fuse the harness just as a backup measure? Cause they sure didn't cure the problem well.

Was this

answer

helpful?

Yes

Tuesday, June 9th, 2020 AT 12:28 PM (Merged)

CHRIS.STOFFEL

MEMBER
2 POSTS
2001 FORD F-150
V8
2WD
AUTOMATIC
116,000 MILES

I was replacing a seal on the bottom of the gearbox, but inorder to actually get the seal replaced I had to completely remove the ger box. After we installed the gearbox the horn doesnt work, the airbag light is on and the cruise control doesnt work. I cant figure it out.

SPONSORED LINKS

Was this

answer

helpful?

Yes

Tuesday, June 9th, 2020 AT 12:28 PM (Merged)

JACOBANDNICKOLAS

MECHANIC
108,133 POSTS

When you removed the gear box, what did you do with the steering shaft? To me it sounds like the clock spring is bad as far as the horn and the airbag light. Have you checked fuses?

Was this

answer

helpful?

Yes

Tuesday, June 9th, 2020 AT 12:28 PM (Merged)

GOLFPRO21

MEMBER
1 POST
2001 FORD F-150
4.6L
V8
2WD
AUTOMATIC
221,000 MILES

Hey guys my cruse control is not working what can I do to fix the problem myself. Could it be fuse? Or something else that I could check to see Im not very skilled in auto repair but Im willing to try anything without having to take it to a dealer thanks

Was this

answer

helpful?

Yes

Tuesday, June 9th, 2020 AT 12:29 PM (Merged)

BMDOUBLE

MECHANIC
1,139 POSTS

The most common fix and the first thing to check is the brake pressure switch on the master cylinder, unplug it and look for fluid in the connector. If it's wet replace it with the new updated switch if the recall has not been done yet, also check the speed control servo connector for brake fluid.