I'm replacing the stock intake duct for my 2003 Honda Accord EX V6

Tiny
ROBSCV123
  • MEMBER
  • 2003 HONDA ACCORD
  • 17,200 MILES
2003 honda accord EX V6. I can't seem to pull off the old one. It's one there really good! Any suggestions?
Wednesday, December 21st, 2011 AT 7:27 PM

13 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Did you loosen all the clamps?
Was this
answer
helpful?
Yes
No
Wednesday, December 21st, 2011 AT 8:48 PM
Tiny
ROBSCV123
  • MEMBER
  • 8 POSTS
Yes.I lossened all the clamps it just seems as if it is glued on. I know it' not glued on it's just really stuck on there good.
Was this
answer
helpful?
Yes
No
Wednesday, December 21st, 2011 AT 9:15 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Its stuck on the throttle body?Or is the air filter lid giving you trouble?
Was this
answer
helpful?
Yes
No
Wednesday, December 21st, 2011 AT 9:18 PM
Tiny
ROBSCV123
  • MEMBER
  • 8 POSTS
It's stock on the Throttle body and the air filter outlet. The air filter lid is not giving me a problem. Also How do I loosen that really skinny coiled clamp that is attached to the air filter outlet?
Was this
answer
helpful?
Yes
No
Wednesday, December 21st, 2011 AT 9:35 PM
Tiny
ROBSCV123
  • MEMBER
  • 8 POSTS
I meant to say it's STUCK sorry.
Was this
answer
helpful?
Yes
No
Wednesday, December 21st, 2011 AT 9:36 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
On the throttle body I would use what is called a hose pick its a long 90 degree pointed pick used to loose the opening of hoses stuck on there connections. You just have to becarefull not to put a hole in the hose. Also could use a regular 90 degree pick or small pocket screwdriver. On the air box side it looks like the spring is only used to hold a little tension on the hose. Try just pulling the hose off or try lighly prying it off.
Was this
answer
helpful?
Yes
No
Wednesday, December 21st, 2011 AT 9:44 PM
Tiny
ROBSCV123
  • MEMBER
  • 8 POSTS
Great! I'll try that! It's also stuck really good on the vaccum hose as well. Wil the same pic or pocket screwdriver work on that as well? I really appreciate your advice. :-)
Was this
answer
helpful?
Yes
No
Wednesday, December 21st, 2011 AT 9:48 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Your welcome thats what were hear yes they will just becarefull not to damage the hoses. Let me know how you make out.
Was this
answer
helpful?
Yes
No
Wednesday, December 21st, 2011 AT 9:56 PM
Tiny
ROBSCV123
  • MEMBER
  • 8 POSTS
OK! Will do!
Was this
answer
helpful?
Yes
No
Wednesday, December 21st, 2011 AT 10:01 PM
Tiny
ROBSCV123
  • MEMBER
  • 8 POSTS
I replaced the air intake duct on Friday. It just took 10 mins and I got the pick set that you mentioned at Wal-Mart for around $5.00 that pulled the hoses right off real nice and it's all back together execpt for the thin spring like clamp on the air filter housing side of the duct. I can't figure out how to get it back on. I can't stretch it enough to put it over the hose. However the duct is on the airfilter housing very tight so I'm thinking when I have the brakes done on the car in a few weeks by my buddy I'll just have him slip that spring clamp on for me real quick. Thank you for all of your help.
Was this
answer
helpful?
Yes
No
Tuesday, December 27th, 2011 AT 10:31 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Your welcome you can swap the spring clamp out for a large hose clamp if you want.
Was this
answer
helpful?
Yes
No
Tuesday, December 27th, 2011 AT 11:36 PM
Tiny
ROBSCV123
  • MEMBER
  • 8 POSTS
Good Idea.I think I'll do that. Thank you! :-)
Was this
answer
helpful?
Yes
No
Tuesday, December 27th, 2011 AT 11:52 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Your welcome.
Was this
answer
helpful?
Yes
No
Wednesday, December 28th, 2011 AT 12:09 AM

Please login or register to post a reply.

Sponsored links