SPONSORED LINKS

Engine light on and no heat on driver's side.

Tiny
ALLENFROMCVILLE
  • MEMBER
  • 5 POSTS
Polarity was correct.
Heat worked fine before modules changed out.
Didn't even know there was an AC computer, so no it
has not been scanned. I assume this is something that has
to be scanned separately?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, January 29th, 2019 AT 6:24 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Yes you have a auto climate control correct?If so you would need a professional scan tool not a diyer scan tool or free auto parts scan. One that can read all the computers in your car. You might even need that scan tool to diagnose the problem.
Was this
answer
helpful?
Yes
No
Tuesday, January 29th, 2019 AT 6:24 PM (Merged)
Tiny
ALLENFROMCVILLE
  • MEMBER
  • 5 POSTS
OK.I have a friend that has one for his body shop. I will see if I can get him to scan. Thanks.
Was this
answer
helpful?
Yes
No
Tuesday, January 29th, 2019 AT 6:24 PM (Merged)
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Your welcome keep me posted.
Was this
answer
helpful?
Yes
No
Tuesday, January 29th, 2019 AT 6:24 PM (Merged)
Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,542 POSTS
  • 2008 CADILLAC CTS
  • 90,000 MILES
Driver side heater don't work passenger side works fine
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, January 29th, 2019 AT 6:24 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check to see if it is getting power to operate the heater. The unit may be bad.
Was this
answer
helpful?
Yes
No
Tuesday, January 29th, 2019 AT 6:24 PM (Merged)
Tiny
SCOTT29
  • MEMBER
  • 1 POST
  • 2004 CADILLAC CTS
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 74,000 MILES
My 04 cts blows cold air on drivers side and warm air on passenger side
Was this
answer
helpful?
Yes
No
Tuesday, January 29th, 2019 AT 6:24 PM (Merged)
Tiny
FACTORYJACK
  • MECHANIC
  • 4,159 POSTS
This is most often a symptom of an HVAC actuator, or blend door problem. It can also be caused by inadequate temperature or flow through the heater core. The first thing to do would be to scan for codes. A typical code reader is only going to give you OBD fault codes, you need a scan tool that is capable of accessing other modules.
Was this
answer
helpful?
Yes
No
+1
Tuesday, January 29th, 2019 AT 6:24 PM (Merged)
Tiny
CPUTNAM428
  • MEMBER
  • 1 POST
  • 2004 CADILLAC CTS
  • 3.6L
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 156,000 MILES
When I have the heat on the passenger side heats up great but the Drivers side does not. Is there a simple fix as in maybe a vacuum line of a valve stuck?. It is duel heat separate for passenger and driver. Just a little strange one side heats up and the other side blows cold
Was this
answer
helpful?
Yes
No
+1
Tuesday, January 29th, 2019 AT 6:24 PM (Merged)
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Try pulling your hvac fuse with your key on for 60 seconds it may reet the actuators otherwise you'll have to have it scanned to see if the driver side actuator is working which it doesn't sound like it is. See pic, first fuse is underhood others under reear seat.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
+1
Tuesday, January 29th, 2019 AT 6:24 PM (Merged)

Please login or register to post a reply.

Related One Side Content

VIEW MORE

Sponsored links