How do you fix a timing issue

Tiny
ALL4THEGOAL
  • 2002 ISUZU RODEO
  • 135,000 MILES

Okay so my isuzu 3.2 v6 is all messed we replaced the timing belt and did like every thing that a machanic would do but still the cams dont match up with the moter when the moter reaches compression stage instead of both valves being closed exaust stays open no mater what we we cant get it to work please help !

Do you
have the same problem?
Yes
No
Sunday, August 28th, 2011 AT 4:23 AM

3 Replies

Tiny
RASMATAZ
  • MEMBER

Put the engine no.1 piston on its compression/TDC and then line up the cam and crank shafts markings

Was this
answer
helpful?
Yes
No
Sunday, August 28th, 2011 AT 4:25 AM
Tiny
KHLOW2008
  • EXPERT
  • 41,977 POSTS

The camshaft would tend to run away so you need to hold them in position while installing the belt.

Was this
answer
helpful?
Yes
No
Sunday, August 28th, 2011 AT 4:42 AM
Tiny
KHLOW2008
  • EXPERT
  • 41,977 POSTS

http://www.2carpros.com/questions/1999-isuzu-rodeo-need-step

Refer to the above link.

Was this
answer
helpful?
Yes
No
Sunday, August 28th, 2011 AT 4:46 AM

Please login or register to post a reply.

Other Timing Belt Replace/Remove Questions