How do we get power to the feul pump?

Tiny
AUZZIE707
  • MEMBER
  • 2002 FORD F-250
  • 40,000 MILES
Rolled truck on right side. We pulled it back up on wheels. Got truck to start but ran like it was running out of feul. Did some repairs started it drove it down the road started running badly and would just idle nothing else. It shut off and would not start back up. Found we had no power to feul pump and when you turn on the key you get no instroment lights on dash. All of the fuses are good. Wondering if it could be computer.
Wednesday, December 21st, 2011 AT 1:48 AM

3 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Could be the ignition switch and do you hear the fuel pump for a few secs when you turn key on?
Was this
answer
helpful?
Yes
No
-1
Wednesday, December 21st, 2011 AT 2:00 AM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
First off, don't roll it.
Check the fuel cut-off switch. See image.
Check the bi-fuel relay in the bi-fuel relay module at the left rear of the engine compartment.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Wednesday, December 21st, 2011 AT 2:02 AM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
Grr
Was this
answer
helpful?
Yes
No
Wednesday, December 21st, 2011 AT 2:03 AM

Please login or register to post a reply.

Related Fuel System Fuel Pump Fuse Content

Fuel Pump Control Module Fuse Replacement
VIDEO
Fuel Pump Control Module Fuse Replacement
Instructional repair video
VIEW MORE