2001 Ford Explorer driver window

Tiny
BONNIELASSIE60
  • MEMBER
  • 2001 FORD EXPLORER
  • 4.0L
  • 6 CYL
  • 4WD
  • AUTOMATIC
We installed a new motor for the driver window. We got the window to go up but we had to reverse the wires on the switch to get the window down then we had to change the wires back to get the window up. At first we thought it might be the relay, but there are no labels on the relays under the hood so we don't know which one is for the window. Do you think it is the relay or does the switch need to be replaced?
Do you
have the same problem?
Yes
No
Monday, September 29th, 2014 AT 1:55 PM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,606 POSTS
Before you do anything get it scanned by a pro as it can be the one touch relay module, gem module as well as the switch. You can test the switch to see if it's sending power if it is then it's one of the modules. Those have to be programmed to your car by apro as well
Was this
answer
helpful?
Yes
No
Monday, September 29th, 2014 AT 3:26 PM

Please login or register to post a reply.

Sponsored links