serpentine belt diagram please

2001 FORD ESCORT
Avatar
TINA1
  • MEMBER
  • 1 POST
serpentine belt diagram for a 2001 ford escort 4 cyl
Mar 17, 2011 at 9:00 PM
Advertisement
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Here is are guides and the diagrams below so you can see how the job is done.

https://www.2carpros.com/diagrams/ford/escort/2001

and

https://www.2carpros.com/articles/replace-serpentine-belt

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Mar 17, 2011 at 9:07 PM
Avatar
MEIERLISA
  • MEMBER
  • 2 POSTS
need intructions for serpintine belt change for 2001 zx2 ford escort
Oct 8, 2018 at 11:54 AM (Merged)
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Removal and Installation

1.Raise and support the vehicle.


2.Rotate the drive belt tensioner clockwise and remove the drive belt.

3.NOTE: Refer to the Component Locations for the drive belt routing.

To install, reverse the removal procedure.


Oct 8, 2018 at 11:54 AM (Merged)
Avatar
TCHANCEY
  • MEMBER
  • 2 POSTS
Engine Mechanical problem
1999 Ford Escort 4 cyl Front Wheel Drive Manual
----------------------------------------------------------------
Do you have a diagram for the drive belt for this automobile?
Oct 8, 2018 at 11:54 AM (Merged)
Avatar
MUSTANG87
  • CERTIFIED EXPERT
  • 261 POSTS
ure car has it on the bottom of hood or somewhere round the front hood lock area.look around for it it has it .its in a sticker form
Oct 8, 2018 at 11:54 AM (Merged)
Avatar
TCHANCEY
  • MEMBER
  • 2 POSTS
[quote:20f7e3e236="mustang87"]ure car has it on the bottom of hood or somewhere round the front hood lock area.look around for it it has it .its in a sticker form[/quote:20f7e3e236]
Thank you for responding. However, the sticker is gone and I didn't find the diagram in the repair manual. That's why I'm hoping someone has one I can look at online. Anymore ideas?
Oct 8, 2018 at 11:54 AM (Merged)
Avatar
MUSTANG87
  • CERTIFIED EXPERT
  • 261 POSTS
go to a auto parts store like auto zone kragen etc they can help.and u can also look at another car like yours,go to a junk yard and look for an escort even an older escort all escorts have same engine just get the sticker off of a junked escort and take it home.
Oct 8, 2018 at 11:54 AM (Merged)
Avatar
MUSTANG87
  • CERTIFIED EXPERT
  • 261 POSTS
hey sorry nOt 100 percent sure on older escorts with 1.8 liter but might possibly be same diagram.FOR SURE LOOK AT A 97 TO 99 ESCORT OR ZX2 ESCORT WITH SAME ENGINE WITCH IS A 2.0 L4 most likely u may find one in a junk yard and take the sticker with diagram home and stick it on ur car.also your local ford dealer can help .good luck
Oct 8, 2018 at 11:54 AM (Merged)
Avatar
BRYANDRRY
  • MEMBER
  • 2 POSTS
What is the belt routing for the 99 escort zx2?
Oct 8, 2018 at 11:54 AM (Merged)
Avatar
BMRFIXIT
  • CERTIFIED EXPERT
  • 19,053 POSTS
here what i have hope that help let me know


https://www.2carpros.com/forum/automotive_pictures/99387_esc_2.jpg

Oct 8, 2018 at 11:54 AM (Merged)
Avatar
BRYANDRRY
  • MEMBER
  • 2 POSTS
Thank you very much. I actually was able to figure it out but man it was a pain to put on. I did the borrow a tool thing from the parts store and the one I got was too long for the car and I couldnt get enough room to move the tensioner far enough to put the belt on so I had to manhandle on with the tensioner moved as far as possible. Not my funnest 3 hours working on the wifes car.
But thanks again
Oct 8, 2018 at 11:54 AM (Merged)
Avatar
WANDA
  • MEMBER
  • 2 POSTS
how does the serpatine belt go on a 2002 ford esscort?
Oct 8, 2018 at 11:54 AM (Merged)
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
On the home page, go to the belt routing diagrams site and put in the information for your vehicle to get the routing diagram needed.
Oct 8, 2018 at 11:54 AM (Merged)
Avatar
CHAPPY72
  • MEMBER
  • 2 POSTS
I need a serpentine belt diagram as well as where is the belt tensionor and how to tighten belt. All this for a Ford Escort zx2
Oct 8, 2018 at 11:54 AM (Merged)
Avatar
BMRFIXIT
  • CERTIFIED EXPERT
  • 19,053 POSTS
Avatar
MATTC1124
  • MEMBER
  • 1 POST
I need a diagram for the Serpentine Belt on my 2002 Ford Escort ZX2
Oct 8, 2018 at 11:55 AM (Merged)
Avatar
BMRFIXIT
  • CERTIFIED EXPERT
  • 19,053 POSTS


https://www.2carpros.com/forum/automotive_pictures/99387_esc_1.jpg

Oct 8, 2018 at 11:55 AM (Merged)
Avatar
BILLMURPHY
  • MEMBER
  • 2 POSTS
Where can I find a diagram for the serpentine belt??


Cheers,

Bill
Oct 8, 2018 at 11:55 AM (Merged)
Avatar
BLUELIGHTNIN6
  • CERTIFIED EXPERT
  • 16,542 POSTS


https://www.2carpros.com/forum/automotive_pictures/261618_Graphic_528.jpg

Oct 8, 2018 at 11:55 AM (Merged)
Avatar
NIGEH4
  • MEMBER
  • 1 POST
i needa fitting diagram and instructions to fit the terrestial drive belt on 1.6 16v zetech engine
Oct 8, 2018 at 11:55 AM (Merged)
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Check on our homepage under drive belts.
Oct 8, 2018 at 11:55 AM (Merged)
Avatar
SPIKE33
  • MEMBER
  • 1 POST
2002 Ford Escort 4 cyl Front Wheel Drive Automatic
----------------------------------------------------------------
were can i get a diogram for the route of the serpintine belt
Oct 8, 2018 at 11:55 AM (Merged)
Avatar
MERLIN2021
  • CERTIFIED EXPERT
  • 17,250 POSTS
3 possibilities, vin "3" vin "P" w/ac and vin "P" wo/ac in that order.


https://www.2carpros.com/forum/automotive_pictures/62217_Beltvin3_1.jpg


https://www.2carpros.com/forum/automotive_pictures/62217_beltsvinpwac_1.jpg


https://www.2carpros.com/forum/automotive_pictures/62217_beltsvinpwoac_1.jpg

Oct 8, 2018 at 11:55 AM (Merged)
Avatar
MEIERLISA
  • MEMBER
  • 2 POSTS
how to change serpentine belt for 2001 zx2 escort
Oct 8, 2018 at 11:55 AM (Merged)
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Removal and Installation


Raise and support the vehicle.


Rotate the drive belt tensioner clockwise and remove the drive belt.
NOTE: Refer to the Component Locations for the drive belt routing.
To install, reverse the removal procedure.
Oct 8, 2018 at 11:55 AM (Merged)
Avatar
DOOGIE
  • MEMBER
  • 1 POST
Engine Mechanical problem
2001 Ford Escort 4 cyl Front Wheel Drive Manual
----------------------------------------------------------------
What is the serpentine belt diagram for 2001 ford escort zx2
Oct 8, 2018 at 11:55 AM (Merged)
Avatar
BMRFIXIT
  • CERTIFIED EXPERT
  • 19,053 POSTS


https://www.2carpros.com/forum/automotive_pictures/99387_esc_3.jpg

Oct 8, 2018 at 11:55 AM (Merged)
Avatar
GARYK0074
  • MEMBER
  • 1 POST
Engine Performance problem
2001 Ford Escort 4 cyl Front Wheel Drive Automatic

I am having problems with my serpentine belt, it kept snapping, come to find out the ac pulley is locked up. Can we release the AC pulley or remove AC unit altogether, and what size belt would we go with if we removed the AC unit?
Oct 8, 2018 at 11:55 AM (Merged)
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Hi garyk0074,

Thank you for the donation.

You can operate the engine without the compressor but I do not have the size for the serpentine belt. However the part No. = F7CZ8620BB

Check with your loacal parts store, they should be able to provide you with the size.
Oct 8, 2018 at 11:55 AM (Merged)
Avatar
PHYLLISRENE
  • MEMBER
  • 3 POSTS
My son has a 2001 Ford Escort and the serpentine belt keeps coming off. It has been replaced several times, along with the pulleys. This is very frustrating. What could be the problem?
Oct 8, 2018 at 11:56 AM (Merged)
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Was the belt tensioner replaced?
Oct 8, 2018 at 11:56 AM (Merged)
Avatar
PHYLLISRENE
  • MEMBER
  • 3 POSTS
Yes, it was replace.
Oct 8, 2018 at 11:56 AM (Merged)
Avatar
PHYLLISRENE
  • MEMBER
  • 3 POSTS
Yes, it was replaced.
Oct 8, 2018 at 11:56 AM (Merged)
Avatar
WINSTON123
  • MEMBER
  • 1 POST
how do i install a serpentine belt on 2001 ford escort zx2.I relese some ension from the tensioner puley below the power sterrint pulley but it is still giving me a hard time
Oct 8, 2018 at 11:56 AM (Merged)
Avatar
DAVE H
  • CERTIFIED EXPERT
  • 13,384 POSTS
you need to release more of the tension !!
Oct 8, 2018 at 11:56 AM (Merged)
Avatar
2ESCORT
  • MEMBER
  • 1 POST
Air Conditioning problem
1998 Ford Escort 4 cyl Front Wheel Drive Automatic

I have a repair manual for my 1998 zx2 escort but can not figure out how to remove the drivebelt so I can replace the nonworking a/c compressor. The manual instruts to put a 13 mm wrench to rotate the belt tensioner clockwise. I know where the tensioner is but I can not find where the 13mm hole is to execute this process.
Oct 8, 2018 at 11:56 AM (Merged)
Avatar
MERLIN2021
  • CERTIFIED EXPERT
  • 17,250 POSTS
It's the 13mm hex head in the middle of the pulley itself.
Oct 8, 2018 at 11:56 AM (Merged)
Avatar
MAC MCSWAIN
  • MEMBER
  • 1 POST
Hey guys! I just changed the serpentine belt on my 97 escort. I can get the engine to crank, but it won't start. Any ideas??
Oct 8, 2018 at 11:56 AM (Merged)
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
Hi there,

just check if you have not disturbed a Sansor wire. Check for spark & fuel. Do a scan to see if a fault code has been set. Start here.

Mark (mhpautos)
Oct 8, 2018 at 11:56 AM (Merged)
Avatar
DVAUTIER
  • MEMBER
  • 1 POST
Drive Train Axles Bearings problem
2000 Ford Escort 4 cyl Two Wheel Drive Automatic
----------------------------------------------------------------
I have exactly the same problem with my son's zx2. the tension wheel is bent and the belt rides over on the side. he runs on half a belt until it breaks.
Oct 8, 2018 at 11:56 AM (Merged)