2001 Dodge Intrepid A/C blend door

Tiny
DEWSER
  • MEMBER
  • 2001 DODGE INTREPID
  • 3.8L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 160,000 MILES
The problem is when I put the a/c on it blows hot air like the heater is on. Once in a while when we put the heat up all the way I would get cold air. Now it doesnt matter what temp I put it on I get hot air.
Do you
have the same problem?
Yes
No
Friday, October 16th, 2015 AT 12:41 PM

5 Replies

Tiny
HMAC300
  • EXPERT
Try pulling fuse for 60 seconds with key on and see if it resets don't move any controls if not see if it is getting power or not then. It can also be a broken blend door as well.
Was this
answer
helpful?
Yes
No
Saturday, October 17th, 2015 AT 7:10 AM
Tiny
DEWSER
  • MEMBER
Im getting code 23
Was this
answer
helpful?
Yes
No
+1
Saturday, October 17th, 2015 AT 7:31 AM
Tiny
HMAC300
  • EXPERT
If this is auto temp control where you set the temperature it has to be scanned by a pro. I cannot find that code in our manual.
Was this
answer
helpful?
Yes
No
Saturday, October 17th, 2015 AT 7:38 AM
Tiny
DEWSER
  • MEMBER
I looked in the paperback manual that I have and it said to set the ac on 75 and hold down the last 3 selectors for 3 seconds and it would blink for 30 sec. Then a code would come up.23 is what came up
Was this
answer
helpful?
Yes
No
+1
Saturday, October 17th, 2015 AT 8:23 AM
Tiny
HMAC300
  • EXPERT
That code means the blend door failure which could be the door, actuator or something else because it's auto temp control. It may be another sensor causing the actuator to ask for heat instead of cool. In future mention if it is auto temp control or not. Do the test in the 2 pics it will tell you if it is the body module or blend door actuator.
Was this
answer
helpful?
Yes
No
Saturday, October 17th, 2015 AT 8:45 AM

Please login or register to post a reply.

Recommended Guides