Whats wrong with dash board gages?

Tiny
CAROLG_64
  • MEMBER
  • 2001 DODGE CARAVAN
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 133 MILES
It started with my turning signal switch. It only worked once in a while. Then it stopped completely. Now all my insterment panal stopped working. Fuses are fine. Whats the problem?
Do you
have the same problem?
Yes
No
Thursday, March 10th, 2011 AT 7:40 PM

1 Reply

Tiny
CARADIODOC
  • EXPERT
The instrument cluster can develop loose connector pins that can be soldered to the copper circuits, but if all of these things are related you might suspect overheated ignition switch contacts or the terminals in the switch connector. In some cases wiggling the ignition switch will make those things start working again if switch contacts are the problem.
Was this
answer
helpful?
Yes
No
Thursday, March 10th, 2011 AT 7:44 PM

Please login or register to post a reply.

Recommended Guides