Turn signal not workin

Tiny
MPGREEZY
  • 2001 CHEVROLET CAVALIER
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 150,000 MILES

How do you replace a flasher relay on an 01 cavalier

Do you
have the same problem?
Yes
No
Monday, December 27th, 2010 AT 6:16 AM

2 Replies

Tiny
FIXITMR
  • MEMBER

The flasher sits above the gas pedal behind a small, black panel. The panel is held on with one star bolt and is situated between the gas panel arm and the bottom of the plastic molding that sits below the steering column. The flasher should be be green and clipped to a small, cube shaped harness and attached to the inside wall by two plastic clips. You will need to use a very small flat head to pry the two pieces apart. After removing the part you can verify that you have the correct replacement by comparing units, often times without opening the packaging on the replacement. Secondly you can verify that you did remove the flasher by putting your keys in the ignition, turning the on and then using your turn signals or hazards.

Was this
answer
helpful?
Yes
No
Monday, December 27th, 2010 AT 6:41 AM
Tiny
MPGREEZY
  • MEMBER

Thank you.

Was this
answer
helpful?
Yes
No
Wednesday, December 29th, 2010 AT 2:57 AM

Please login or register to post a reply.

Other Turn Signal Light Not Working Questions