SPONSORED LINKS

ABS, SRS and DSA lights are on

Tiny
2CP-ARCHIVES
  • MEMBER
  • 2001 ACURA CL
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 87,000 MILES
I just had the brake and rotors replaced. Any idea where to start?
Thursday, October 7th, 1999 AT 1:44 AM

2 Replies

Tiny
2CP-ARCHIVES
  • MEMBER
  • 4,542 POSTS
Yes, it sounds like the rotor that got replaced do not have the ABS reluctor ring on them and the ABS system has detected this, please check it and get back to me.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, October 6th, 2010 AT 6:46 PM
Tiny
KASEKENNY
  • MECHANIC
  • 18,907 POSTS
I agree this sounds like you have non ABS rotors installed on the vehicle.

Here are some guides that will help with this but we need to start with checking for codes:

https://www.youtube.com/watch?v=rTtAnsOlZU4

https://www.2carpros.com/articles/how-to-replace-front-brake-pads-and-rotors-fwd

Then we need to remove and inspect/replace any rotor that does not have the ABS/speed sensor wheel tone wheel is installed. Below is the process from the manual on how to do this. Thanks
Images (Click to make bigger)
Thumb
Thumb
Was this
answer
helpful?
Yes
No
Wednesday, March 3rd, 2021 AT 2:16 PM

Please login or register to post a reply.

Related Airbag Replace/Remove Content

Airbag Removal - Drivers Side
GUIDE
Airbag Removal - Drivers Side
Removing an airbag inflation module is not a difficult job but needs to be done correctly to avoid accidental deployment. In this guide we will walk you through the steps...

Sponsored links