2000 Hyundai Elantra overheated

Tiny
JOHNNY RIOS
  • MEMBER
  • 2000 HYUNDAI ELANTRA
Car overheated now little water in oil and water pressure shoots out backwards what do I do to fix it what parts are effected and wheat's the cheapest ways to fix problem without having to do too much mechanic work
Sunday, August 18th, 2013 AT 2:39 PM

2 Replies

Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,004 POSTS
SOUNDS LIKE YOUR HEAD GASKET IS BLOWN

THIS WILL REQUIRE REMOVING THE HEAD(S), CHECKING TO SEE IF THEY ARE WARPED, POSSIBLE HAVING THEM AND MACHINED, AND POSSIBLY REBUILT. THEN REINSTALLED, USING PROPER TORQUES AND TORQUE SEQUENCE

. THIS IS A REALLY INVOLVED TASK FOR SOMEONE WITH FEW TOOLS AND LITTLE EXPERIENCE

THERE ARE SOME "POUR IN" FIXES AVAILABLE, THE INSTRUCTIONS MUST BE FOLLOWED TO A "TEE" AND DEPENDING ON THE SEVERITY OF THE BLOWN GASKET. EVEN THESE MIGHT NOT WORK. OTHERS WHO HAVE USED THESE TELL ME IT IS A TEMPORARY REPAIR

GOOD LUCK!

THE MEDIC
Was this
answer
helpful?
Yes
No
Sunday, August 18th, 2013 AT 3:00 PM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,757 POSTS
That one sounds pretty bad. You likely have extensive damage well beyond the head gasket. I'd say you should be looking for another motor. You don't want to sink $1000 into that one only to find out the motor is shot.
Was this
answer
helpful?
Yes
No
Sunday, August 18th, 2013 AT 3:27 PM

Please login or register to post a reply.

Sponsored links