Does not want to start after removal of the engine and transmission

Tiny
JOZZZZY
  • MEMBER
  • 2000 GMC JIMMY
Hi I have a 2000 gmc jimmy 4wd it does not want to start after I have removed the engine and transmission and placed it back together. Just took out transmission and engine out of car placed them back together and my car does not want to start before I did all this it did
Do you
have the same problem?
Yes
No
Sunday, July 29th, 2012 AT 11:56 PM

5 Replies

Tiny
ASEMASTER6371
  • EXPERT
What repairs were performed?

Check for fuel pressure, spark and compression

Roy
Was this
answer
helpful?
Yes
No
Monday, July 30th, 2012 AT 1:17 AM
Tiny
JOZZZZY
  • MEMBER
I just changed a damaged piston
Was this
answer
helpful?
Yes
No
Monday, July 30th, 2012 AT 1:33 AM
Tiny
ASEMASTER6371
  • EXPERT
Ok, start with basics as I suggested.

Roy
Was this
answer
helpful?
Yes
No
Monday, July 30th, 2012 AT 1:41 AM
Tiny
JOZZZZY
  • MEMBER
Okay thanks ill get back to you as soon as I can
Was this
answer
helpful?
Yes
No
Monday, July 30th, 2012 AT 1:43 AM
Tiny
ASEMASTER6371
  • EXPERT
No problem

Roy
Was this
answer
helpful?
Yes
No
Monday, July 30th, 2012 AT 1:47 AM

Please login or register to post a reply.

Recommended Guides