Ok my heater blows but its not getting hot at all and there is a clicking noise in the rear driver side panel.
and when u turn a corner there is a grinding noise in the rear end its acts like it trys to lock up.
and how do u change the plugs in the 5.4 triton
have the same problem?
Thursday, December 12th, 2013 AT 8:27 PM
Disconnect the Coil On Plug (COP) electrical connectors. Remove the COP bolt and Remove the COP. Remove any foreign debris from the spark plug wells with compressed air. Remove the spark plugs. To install, reverse removal procedure. Tighten to specification 7-14 ft lbs. Make absolutely sure to do on a COLD engine and use anti seize on replacement plugs.