Why won't my 4 wheel lock light won'tcome on when in 4 wheel drive
ROCKET691
MEMBER
2000 DODGE DAKOTA
191,000 MILES
The light in the insterment cluster for 4 wheel lock dosen't come on when the the shifter on the floor is put into 4lo or 4hi. Could this be the transfer case position sensor. If that is possible where is it located and hopw do you test it?
SPONSORED LINKS
Do you
have the same problem?
Yes
No
Saturday, September 10th, 2011 AT 3:02 PM
3 Replies
JACOBANDNICKOLAS
EXPERT
I think you are correct. THere is a switch on the top (of all places) of the transfer case that turns the light in. They go bad. The part just unbolts, but it is a tight space.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, September 10th, 2011 AT 5:32 PM
ROCKET691
MEMBER
Could you please send me a picture or diagram of where this sensor is?
Was this
answer
helpful?
Yes
No
Saturday, September 10th, 2011 AT 7:53 PM
JACOBANDNICKOLAS
EXPERT
Here is what I was able to find. I believe you need to locate the mode sensor. Confirm that with the parts store. NOTE: This picture is for a 6 cylinder auto trans.