ENGINE BOGS DOWN WITH CODES P0102 AND P0113

  • Tiny
  • Grunk
  • 1999 Ford F-250
  • 199 miles

1999 f-250 SD 4x4 V10. After having the 4R100 Trans and 273 T case repaired I cant keep it running. It runs great cold after warm up it bogs down when you give it the gas. Take it out of gear and rev it up does great put it in gear and give it the gas but it falters. I have replaced the mass air flow sensor, tps, cam sensor, air filter. No codes are found.I had this scanned at RUSH FORD of Denver they came up with these codes P0102 and P0113

Wednesday, April 4th, 2012 AT 2:22 PM

3 Answers

  • Tiny
  • hmac300
  • Expert
  • 43,024 posts

One is intake air temp and the other maf high voltage. Look for a blockage in duct work or a broken duct or broken rubber piece to vavle covers. Also try cleaning maf with choke cleaner.

Was this
answer
helpful?
Yes
No
Wednesday, April 4th, 2012 AT 2:49 PM
  • Tiny
  • Grunk
  • Member

I will check for those. My fuel psi 32-40 my vac is 18-20. I have check for blockage in the exhaust

Was this
answer
helpful?
Yes
No
Wednesday, April 4th, 2012 AT 3:38 PM
  • Tiny
  • hmac300
  • Expert
  • 43,024 posts

Also try to clean the throttle plate and iac valve with choke cleaner. They gum up and especially effect running at idle or coming to a stop

Was this
answer
helpful?
Yes
No
Wednesday, April 4th, 2012 AT 3:44 PM

Please login or register to post a reply.

Similar Questions