SPONSORED LINKS

ABS lite on, will not shift out of first, code tester w/n test

Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
Is your answer the same as OCT 30?
Was this
answer
helpful?
Yes
No
Wednesday, November 2nd, 2011 AT 9:46 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Who told you it could be the body control module?The body control module controls body functions like door locks keyless entry security lighting etc. Again to test it there really isnt a bench test you would have to make sure the wires were good terminal tightness power and ground to the body control module.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, November 2nd, 2011 AT 10:23 PM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
I saw a wiring dirgram and the vss and abs goes or comes thur it
Was this
answer
helpful?
Yes
No
Wednesday, November 2nd, 2011 AT 10:49 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Yes it would because the body control module runs the cluster so the vss would have a input for the speedometer. Also you have a abs light on the dash that turns on so that would be the abs input.
Was this
answer
helpful?
Yes
No
Wednesday, November 2nd, 2011 AT 10:54 PM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
Could this cause my problem? And also would a ECP solenoid on the trany cause it also?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, November 3rd, 2011 AT 12:38 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Heres the problem you had a lot of codes from all different circuits so to say the ecp solenoid caused all these codes on these many different circuits would be impossible. Have you had any problems starter the car like the starter turning the engine over?Have you made sure the battery cables are clean and tight?Also have you had the alternator and battery tested?
Was this
answer
helpful?
Yes
No
Thursday, November 3rd, 2011 AT 1:02 AM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
No working ok, all tested good this summer, my trany was leaking at the ecp soenoid and trany guy changed it and the harness and was useing my 4 week and half before this started?
Was this
answer
helpful?
Yes
No
Thursday, November 3rd, 2011 AT 1:19 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
If that harness connects all the other shift solenoids to it then that could be possible to set all the shift solenoid codes.
Was this
answer
helpful?
Yes
No
Thursday, November 3rd, 2011 AT 1:38 AM
Tiny
KEBBLER69
  • MEMBER
  • 27 POSTS
I have no clue what it ties in with, I just know it was changed?
Was this
answer
helpful?
Yes
No
Thursday, November 3rd, 2011 AT 1:55 AM
Tiny
RIVERMIKERAT
  • MECHANIC
  • 6,110 POSTS
Kebbler, did you find out what the harness in question connects to so we can finish helping you figure this problem out?
Was this
answer
helpful?
Yes
No
Friday, January 27th, 2012 AT 6:37 AM

Please login or register to post a reply.

Related ABS Light Content

How to Get ABS Codes Video
VIDEO
How to Get ABS Codes Video
Instructional repair video
VIEW MORE

Sponsored links