CRANK BUT NOT START

  • Tiny
  • Andy akas
  • 1997 Mazda 626
  • 2,230,000 miles

Alternator problem that lead to a high voltage after replacing. So the car crank but could not start. I discover that one of the indicator light is not showing. The battery, oil, and ABS indicators lights are on, but there is one particular one with a car and a key logo inside, it is not showing, and it normally shows before the car use to start. What might be the cause?

Do you
have the same problem?
Yes
No
Thursday, August 9th, 2012 AT 3:15 AM

1 Reply

  • Tiny
  • carolinacarconnection
  • Expert
  • 68 posts

Sounds like you have a security issue or you have burnt up one of the cars computer systems. Does the car have keyless entry? If so close all doors lock the car and then unlock with the remote and try again. If no keyless entry lock all doors and unlock at driver door and try to start it. Report back and ill try to assist you further.

Thanks

Was this
answer
helpful?
Yes
No
Thursday, August 9th, 2012 AT 3:37 AM

Please login or register to post a reply.

Similar Questions