Cylinder head torque specs

Tiny
SHEILA
  • MEMBER
  • 1996 MITSUBISHI ECLIPSE
  • 4 CYL
  • FWD
  • MANUAL
  • 238,000 MILES
What are the torque specs for mitsubishi 420a?
Do you
have the same problem?
Yes
No
Saturday, July 2nd, 2011 AT 9:18 PM

4 Replies

Tiny
KHLOW2008
  • EXPERT
Here is the chart with the torque specs and a video on how to use a torque wrench correctly.

https://youtu.be/juOClONIWeY

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

Cheers
Was this
answer
helpful?
Yes
No
Sunday, July 3rd, 2011 AT 12:02 PM
Tiny
J7O1SH9
  • MEMBER
  • 1998 MITSUBISHI ECLIPSE
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 120,000 MILES
Can u swap a 98' cylinder head eclipse for a worked over ported and polish 91 cylinder head eclipse
Was this
answer
helpful?
Yes
No
Tuesday, October 2nd, 2018 AT 12:38 PM (Merged)
Tiny
F150NEWBIE
  • MEMBER
Is your vehicle turbocharged 2.0? Is the head from a turbocharged 2.0? If yes to both answer, then yes you can! As a matter of fact, The 1g (1990-94) head is sought after because of bigger intake ports. If your engine is a 1.8, then your head must be 1.8.
Was this
answer
helpful?
Yes
No
Tuesday, October 2nd, 2018 AT 12:38 PM (Merged)
Tiny
INTERNATIONAL AUTO
  • MEMBER
  • 1997 MITSUBISHI ECLIPSE
  • 4 CYL
  • 2WD
  • MANUAL
  • 105,000 MILES
Torque for cylinder head thank you!
Was this
answer
helpful?
Yes
No
Tuesday, October 2nd, 2018 AT 12:38 PM (Merged)

Please login or register to post a reply.

Recommended Guides