SPONSORED LINKS

S-10 Blazer won't start

Tiny
JESSE GARCIA
  • MEMBER
  • 1996 CHEVROLET S-10
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 154,000 MILES
I have a 96 S10 Blazer had some work done on it last year, 2 injectors 2 oxygen sensors a map sensor fuel filter in order to pass inspection. It has always been cold start but has always started, engine turns over I can hear the fuel pump working, and if I pump the gas pedal I smell fuel. WONT START what else can I do.
SPONSORED LINKS
Wednesday, January 12th, 2011 AT 9:04 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check to see if you are getting spark. DIY on this siteshows how to check it. Then go from there.
Was this
answer
helpful?
Yes
No
Thursday, January 13th, 2011 AT 1:01 AM
Tiny
JESSE GARCIA
  • MEMBER
  • 2 POSTS
Yes, I already have done that, and it does have spark. Any other suggestions?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, January 13th, 2011 AT 2:52 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check your fuel pressure, it shold be 60-66 psi. If not correct check regulator and plugged filter. If the fuel pressure isn't at minimum it won't get enough fuel to run. Also check your compression.
Was this
answer
helpful?
Yes
No
Thursday, January 13th, 2011 AT 2:39 PM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting - Top 3 Easy Steps
GUIDE
Engine Not Starting - Top 3 Easy Steps
Over the past 20 years on 2CarPros we have identified the top three problems that are easily fixed. This can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links