No power to crank and CAM sensor

Yes lol my pcm is a lil silver looking computer box inside the kick panel and my ecm or ecu is gray under the hood

I believe you, if my database doesn't show it, not much I can do?

Hey I got a new pcm but I now get a p0335 and a p0342 changed crank sensor and cam sensor

Any driveability issues? Check ref voltage--ground--signal. You may need to check wiring circuits. Other than that, I don't know what else to tell you?

No power to crank sensor wire also checked with wire unplugged from pcm still no power its a yellow wire any ideas when I say no power I mean at either end of the wire

The yellow wire is signal from crank sensor to pcm. The other two wires are ref voltage and ground. The cam and crank sensors share ref voltage and ground.

Ok on my vehicle the yellow wire is the single wire in the 3wire plug and the ground and signal wire is next to each other

You can see A--B--D in my diagram, that's all I have. The signal wire is not shared with the other sensor.

All I see in your diagram you sent me is a-b-c no d

I hit the wrong key. Have a good day.