SPONSORED LINKS

IAC Valce Compatibility

Tiny
KAIKIING
  • MEMBER
  • 1994 TOYOTA COROLLA
  • 163,657 MILES
Hi,

I've a toyota corolla AE100 16 Valve EFI year 1994 was aspect the IAC fault.I fail to find the same model of IAC as mine and only get 1 which is for toyota AE110 16 valve EFI. Will it fit with my AE100?
Sunday, September 25th, 2011 AT 9:31 AM

7 Replies

Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
If the part numbers are the same it should be ok, it would be wort trying it if you can't get the correct valve, if it is not suitable, you will just have to get the correct valve.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, September 25th, 2011 AT 9:42 AM
Tiny
KAIKIING
  • MEMBER
  • 44 POSTS
May I know how to verify that it is suitable?After install the valve car become idle. But I noticed that the two valve have a little difference with the size of open.
Was this
answer
helpful?
Yes
No
Sunday, September 25th, 2011 AT 9:46 AM
Tiny
KAIKIING
  • MEMBER
  • 44 POSTS
Hi,

May I knw which is the part number of the IAC? What I mean with the size of open is as attached photo. AE100 valve did not open till full of the hole but AE110 valve is widely open when test. Any effect if the valve is not suitable?

Thanks.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Sunday, September 25th, 2011 AT 10:04 AM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
This valve will not be suitable, you will have to locate the correct valve.
Was this
answer
helpful?
Yes
No
Sunday, September 25th, 2011 AT 10:06 AM
Tiny
KAIKIING
  • MEMBER
  • 44 POSTS
May I know why u say so?Do you mean the valve already not function?This is the original valve I get in my AE100.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, September 25th, 2011 AT 10:17 AM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,938 POSTS
I do not think that the AE110 valve will be any good for your problem.
Was this
answer
helpful?
Yes
No
Sunday, September 25th, 2011 AT 1:59 PM
Tiny
KAIKIING
  • MEMBER
  • 44 POSTS
Erm. What do you mean with the AE110 valve will be any good for my problem?Is it ok for us to totally unscrew the valve for cleaning purpose?I unscrew the 2 screw at another side of magnet side but aft screw them back feel like got some different with the location. Any guides for that?

Thank you.
Was this
answer
helpful?
Yes
No
Sunday, September 25th, 2011 AT 2:53 PM

Please login or register to post a reply.

Related Idle Air Control Content

Idle Air Control Clean
VIDEO
Idle Air Control Clean
Instructional repair video
Idle Air Control Valve Service
GUIDE
Idle Air Control Valve Service
The idle air control valve is responsible for controlling the engine idle speed via the car's PCM (computer). These valves are configured differently depending on...
VIEW MORE

Sponsored links