California emission air assisted fuel injectors

Tiny
YDASMSTR
  • MEMBER
  • 1994 TOYOTA CAMRY
  • 250,000 MILES
I am trying to find where the hose for the air assisted fuel injectors connects to. I have the one end connected to the cylinder head but I do not know where the other end goes.
Tuesday, October 4th, 2011 AT 7:44 PM

14 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
What engine?
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 8:07 PM
Tiny
YDASMSTR
  • MEMBER
  • 7 POSTS
Oops I apologize forgot the most important information. It is a 2.2l I4 (5s-fe) engine
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 8:16 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
This is the only lthing I can find on that. I'm sending the vacuum diagram and the fuel rail hook up.
Was this
answer
helpful?
Yes
No
+3
Tuesday, October 4th, 2011 AT 8:31 PM
Tiny
YDASMSTR
  • MEMBER
  • 7 POSTS
No its not on here thank you anyway
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 8:34 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Ok I can't find anything at all on what you asked for sorry
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 8:35 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Just to add to this one are you talking about the egr valve?
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 8:55 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Does it look like the image I just posted?
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 9:00 PM
Tiny
YDASMSTR
  • MEMBER
  • 7 POSTS
No, on the california emmissions cylinder head for the 94-96 years they had air assist fuel injectors. On the head itself inbetween the number 2 and 3 fuel injectors there is a hose barb. This hose barb is supposed to have a hose connected to it to supply the injectors with air. My problem is that the hose was cut and I have no clue where the air supply came from to reconnect it.
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 9:08 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Can you post a pic of the barb that would really help.
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 9:13 PM
Tiny
YDASMSTR
  • MEMBER
  • 7 POSTS
Sure I don't have a picture now but I will get one later and post it tonight
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 9:17 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,869 POSTS
Sounds good on posting a pic check out these two parts I posted do the look like the part your talking about?
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 9:30 PM
Tiny
YDASMSTR
  • MEMBER
  • 7 POSTS
Here is a picture I found on the net. That is the barb in question I don't know where air supply to that barb comes from.
Was this
answer
helpful?
Yes
No
+1
Tuesday, October 4th, 2011 AT 9:55 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Ok here is another pic that ican see. It's the only other ting ican find. Its' an air vsvalve which looks like it goes on top of valve cover. Other than that I dont' know what to tell you.
Was this
answer
helpful?
Yes
No
Tuesday, October 4th, 2011 AT 10:15 PM
Tiny
YDASMSTR
  • MEMBER
  • 7 POSTS
Ok well I figured it out. I'll post here just in case anyone else has the same question. One end of the hose attaches to the nipple on the cylinder head (I have already posted a pick showing the nipple in question above). And the other end connects to the Idle air control valve. On the 1994 California emissions camry with the 5sfe engine (2.2l 4 cylinder) the Idle air control valve has 3 nipples. The 2 outside ones are for coolant lines the center one is for the air assistedfuel injectors. Now thiss is only on Toyota Camrys that are sold in California model years of 1994 through 1996with the 5sfe engine.
Was this
answer
helpful?
Yes
No
+4
Saturday, October 22nd, 2011 AT 2:09 AM

Please login or register to post a reply.

Sponsored links