BECOME A MEMBER
Sign up with Facebook
I AGREE TO THE
Login with Facebook
BECOME A MEMBER
1994 HONDA PRELUDE
Hey I was wondering how would I replace an ABS pump on a 1994 Honda prelude DOHC Thanks
have the same problem?
Friday, January 21st, 2011 AT 11:16 PM
You need to release the pressure by loosensing the pressure relief valve first.
Removal of the modulator/pump assy requires the pipes to be disconnected and the bolts holding the bracket to be removed.
Some manuevering of the unit is required during removal.
Friday, January 21st, 2011 AT 11:53 PM
Thanks a lot for your help and time.
Saturday, January 22nd, 2011 AT 1:25 AM
to post a reply.
Other ABS Pump Motor Stays On Questions
1997 Bmw 523 No Voltage
Electrical Problem 1997 Bmw 523 6 Cyl Two Wheel Drive Manual 127000 Miles There Is No Voltage On Any Terminals At The Abs Pump Module ...
1993 Chrysler Imperial Electrical Problems
Electrical Problem 1993 Chrysler Imperial 6 Cyl Front Wheel Drive Automatic I Beleive There Is A Electrical Short In My Car. The Abs ...
1996 Jaguar Xj6 4.0
My Abs Pump Stays On All The Time, Also The Abs Light Comes On 20 Seconds After I Start Driving It. I Disconnected The Pump But The Light...
My Abs Light Is On And Could It Be The Abs Pump Brake...
My Abs Light Is On And Could It Be The Abs Pump Brake Paddle Is Hard
Related ABS Pump Motor Stays On Questions
1996 Honda Accord Abs Pump Runs Every 20-30 Minutes
2003 Dodge Ram Abs Pump And Lights On!
Abs Light On, Motor On Abs System Run After Key Off
Ask a Car Question. It's Free!
Repalce Your ABS Module
Brake Pad/Rotor Replacement Toyota Tacoma
Brake Pad/rotor Replacement - Front
Find a car manual for your car
© 1999 - 2016 2CarPros, Inc.