IF YOU ARE REPLACING THE WATER PUMP AND THE ...

  • Tiny
  • Anonymous
  • 1994 BUICK SKYLARK

If you are replacing the water pump and the serpentine belt, do you have to remove the motor mounts to replace the belt?
3.1 v6 vin (m)

Thursday, January 3rd, 2013 AT 1:18 AM

1 Reply

  • Tiny
  • ASEMaster6371
  • EXPERT
  • 25,554 POSTS

Possibly the upper mount which is simple to do.

Remove or Disconnect

Negative battery cable.
Support engine by the oil pan.
Right engine mount intermediate bracket.
Auxiliary bracket.
Lift or rotate tensioner using J 39914 tension adjuster.
Serpentine drive belt.

Install or Connect

Lift or rotate tensioner using J 39914 tension adjuster.
Serpentine drive belt.
Right engine mount intermediate bracket.
Auxiliary bracket.
Remove floor jack.
Negative battery cable.

Was this
answer
helpful?
Yes
No
Thursday, January 3rd, 2013 AT 1:31 AM

Please login or register to post a reply.

Other Serpentine Belt Replace/Remove Questions