1993 Toyota Camry engone hesitation

Tiny
NOLAN57
  • MEMBER
  • 1993 TOYOTA CAMRY
  • 3.0L
  • V6
  • FWD
  • AUTOMATIC
  • 145,000 MILES
I have a 93 camry that hesitates and sputters when accelerating. It seems to do it worse after it's warmed up. It idles and revs up while stopped just fine. Only does it when accelerating. Doesn't matter if it is slow or fast acceleration. I recently replaced the fuel filter with no improvement. Also added HEET in case I got bad fuel with no improvement. Any ideas what I should do next?
Sunday, June 28th, 2015 AT 2:14 PM

7 Replies

Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
What do the spark plugs and wires look like?
Was this
answer
helpful?
Yes
No
Sunday, June 28th, 2015 AT 2:39 PM
Tiny
NOLAN57
  • MEMBER
  • 9 POSTS
Ive pulled one and it seemed ok but Im not sure what to look for. Do u recommend replacing them?
Was this
answer
helpful?
Yes
No
Sunday, June 28th, 2015 AT 3:40 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Do they look like there the original wires?Do they have a date on the wires?
Was this
answer
helpful?
Yes
No
Sunday, June 28th, 2015 AT 3:57 PM
Tiny
NOLAN57
  • MEMBER
  • 9 POSTS
They are bosch wires. No date but probably not the originals. Today it is running fine but missing when idling, so just the opposite of what its been doing
Was this
answer
helpful?
Yes
No
Monday, June 29th, 2015 AT 10:51 AM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
If its only missing at idle then I would look for vacuum leaks hoses etc.
Was this
answer
helpful?
Yes
No
Monday, June 29th, 2015 AT 12:14 PM
Tiny
NOLAN57
  • MEMBER
  • 9 POSTS
Where are they at and whats the best way to detect a leak?
Was this
answer
helpful?
Yes
No
Monday, June 29th, 2015 AT 5:09 PM
Tiny
SATURNTECH9
  • MECHANIC
  • 30,870 POSTS
Every engine is different and has there problem areas you would have to check all the vacuum hoses intake manifold etc everywhere there is vacuum running. Injecting smoke into the vacuum system is the best way then look for escaping smoke. But without building a smoke machine. To buy a smoke machine is really expensive I built my smoke machine it works great. You can try spraying carb spray around at idle looking for a increase/decrease in rpms stumbling or dieing. But smoke is by far the best way to look for vacuum leaks.
Was this
answer
helpful?
Yes
No
Monday, June 29th, 2015 AT 11:41 PM

Please login or register to post a reply.

Sponsored links