How do I take off the fuel line with the filter attached to it?

Tiny
GMC2010
  • MEMBER
  • 1992 GMC SONOMA
  • 135,000 MILES
Truck will not stay running and if it does the idle is rough.
Thursday, August 23rd, 2012 AT 8:34 PM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,600 POSTS
Check fuel pressure first, there is a tool to disconnect the line on one or possibly both ends depending on what engine you have. It also may have a line fitting which should be 16mm on the line and 19 on filter if memeory serves me right. If you have a tbi unit fuel pressure should be 9-11 psi.
Was this
answer
helpful?
Yes
No
Thursday, August 23rd, 2012 AT 9:04 PM
Tiny
HMAC300
  • MECHANIC
  • 48,600 POSTS
One other thing I forgot check to see if y ou have a vacuum leak under tbi unti they tend to blow gaskets there as well as the line going to map sensor gets soft and won't allow the map to work correctly. Pcv valve hose as well.
Was this
answer
helpful?
Yes
No
Thursday, August 23rd, 2012 AT 9:05 PM

Please login or register to post a reply.

Sponsored links