1991 Toyota 4Runner speedometer cable stuck to cluster

Tiny
BENJANI127
  • MEMBER
  • 1991 TOYOTA 4RUNNER
  • 120,000 MILES
I have removed and replaced the speedometer cable. All that is left is to disconnect the last 6 inches of the cable from the back of the cluster. It will not budge. I have taken apart the cluster and have the speedometer disconnected from the
Do you
have the same problem?
Yes
No
Tuesday, June 4th, 2013 AT 4:24 PM

3 Replies

Tiny
MHPAUTOS
  • EXPERT
I am sure that they just clip in, push the tab on the outer ring and it should just pull off. Can you post a pic of the type of end on the speedo head.
Was this
answer
helpful?
Yes
No
Wednesday, June 5th, 2013 AT 3:58 AM
Tiny
BENJANI127
  • MEMBER
I have tried pushing on the rings and nothing moves. It still does not pull off either.
Was this
answer
helpful?
Yes
No
Wednesday, June 5th, 2013 AT 8:41 AM
Tiny
MHPAUTOS
  • EXPERT
The broken drive into the back of the speedo will pull out, the round metal sleeve is the drive, it just sits in that and it does not extend through to the needle spindle in pic 1, that is NOT the end of the drive.
Was this
answer
helpful?
Yes
No
Thursday, June 6th, 2013 AT 3:08 AM

Please login or register to post a reply.

Sponsored links