1991 Ford Ranger Electrical

Tiny
JOSECORDOVA
  • MEMBER
  • 1991 FORD RANGER
  • 3.0L
  • V6
  • RWD
  • AUTOMATIC
  • 87,000 MILES
Put battery in backwards and tried jumping; replaced master cylinoid, ignition control module, ignition coil spark plugs oil filter and new battery. It Cranks as well was told to replace engine control module but not sure if will fix problem
Do you
have the same problem?
Yes
No
Monday, August 17th, 2015 AT 2:00 PM

5 Replies

Tiny
HMAC300
  • EXPERT
Check fuses in pic in power dist box as well as fuse 1
Was this
answer
helpful?
Yes
No
Tuesday, August 18th, 2015 AT 9:26 AM
Tiny
JOSECORDOVA
  • MEMBER
Fuses were replaced as well as fuel pump relay
Was this
answer
helpful?
Yes
No
Tuesday, August 18th, 2015 AT 12:43 PM
Tiny
HMAC300
  • EXPERT
San for codes and check fuel pressure with a gauge then. Start there.
Was this
answer
helpful?
Yes
No
Tuesday, August 18th, 2015 AT 12:45 PM
Tiny
JOSECORDOVA
  • MEMBER
How can I check fuel pump pressure? B/c fuel pump was replaced about a year ago
Was this
answer
helpful?
Yes
No
Tuesday, August 18th, 2015 AT 12:50 PM
Tiny
HMAC300
  • EXPERT
Rent a gauge from auto parts hook up to fuel rail and turn thekey on 30-45 psi
Was this
answer
helpful?
Yes
No
Tuesday, August 18th, 2015 AT 4:22 PM

Please login or register to post a reply.

Recommended Guides