FORD COMPUTER NO COMMUNICATION

My Truck Started Having Dash Lights Flash, Wrench Warning Came On, I Shut The Truck Off, It Would Not Restart, I Was Able To Restart By...

I Turned My Truck Off At Night. In The Morning I Turned It On And The Check Engine Light Was On. A Couple Weeks Ago The Check Engine Light...

I Have Tried Several Scan Tools With The Same Result No Communication. I Tested The Pins On The Obd2 Port I Have Twelve Volts On Pin 16...

When I First Got The Truck The Front Passenger Side Had Major Collision Damage. After Doing The Necessary Body Work The Truck Ran Fine....

No Scanner Connection, It Stays Off. I Check The Scanner On Other Vehicle And It Is Okay.

Turn The Key Theft Light Does Not Turn On For Three Seconds, The Fuel Pump Does Not Turn On And Prime, Try To Start. The Starter Does Turn...

My Code Reader Says Link Error.

Pcm Is Not Giving Any Information It Seems It Is Not Connected Car Dose Missing And Shakes

I'm Currently Working To Figure Out If I Have A Bad Pcm Or A Power/ground Issue To The Pcm. I Need To Pinout For Main Power/ground For...

I Need Pinout For The Vehicle Listed Above Diesel.