CHEVROLET OBD1 CODES CODE 43

My Truck Shows Code 43 But Had No Plug For The Electronic Spark Control Or The Control Its Self On My Motor I Do Believe Its Code 43 I Ran...

I Am Currently Getting A Code 43. New Knock Sensor New Module New Ecm And It Is Still Popping Up Code 43. Truck Has Been Rebuilt Just Top...

Car Shut Off At Work Hit With Starting Fluid And Fired, Ran For A Couple Weeks And Wouldn't Start One Morning. Has Schrader Valve For...

Truck Runs Fine Until It Gets Warm And Then Code 43 Comes Up And Truck Has No Power At All And Barely Wants To Stay Running. I've Had...

1990 Vett Not Zr1. Have Code 43. Most Often It Set Codevery Shortly After Starting Engine. Have Replaced Knock Sensor Twice, Replaced...

Ok I Have Code 43 And Ive Replaced Both Knock Sensors And The Wiring To The One On Side Of Block. Getting 4.77volts At Connector With...

Just Put Brand New Gm 5.7 Long Block In Truck, New Distributor, Fuel Pump, Water Pump And So On. I Have About 120 Miles On Motor Last 2...

Code 43 Car Will Become Sluggish With No Power Even With Pedal All The Way Down. If You Restart The Key, The Car Will Run Fine For A Bit...

My Code Reader Is Throwing Up 43 Esc, But I Do Not Have The Sensor In My Truck. My Truck Does Not Take One. Also, I’m Having Issues With...

Hi. I Get The The Trouble Code 43, And Just Recently When I Start The Truck, It Wont Start Up Right Away. It Takes About 3 Times To Get It...