Shut off while driving will not start

Tiny
88BRONC2
  • MEMBER
  • 1990 FORD BRONCO
  • 2.9L
  • 6 CYL
  • 4WD
  • MANUAL
  • 129,000 MILES
I replaced fuel pump and filter. Replaced coil and relays and fuses are good as well as inertia switch. Vehicle is a Bronco II.
Sunday, July 7th, 2019 AT 12:55 PM

3 Replies

Tiny
SCGRANTURISMO
  • MECHANIC
  • 4,897 POSTS
Hello,

Have you checked the engine oil level? Please check the engine oil level and the coolant level and get back to us with what you are able to find out.

Thanks,
Alex
2CarPros
Was this
answer
helpful?
Yes
No
Sunday, July 7th, 2019 AT 1:16 PM
Tiny
88BRONC2
  • MEMBER
  • 2 POSTS
Yes all fluids are good.
Was this
answer
helpful?
Yes
No
Sunday, July 7th, 2019 AT 1:41 PM
Tiny
SCGRANTURISMO
  • MECHANIC
  • 4,897 POSTS
Hello again,

Okay, you need three things for an engine to start and run, 1) Spark (delivered at the proper time), 2) Fuel 3) Compression. If these three things are present then and engine has no choice but to start and run. So, let's see if your vehicle's engine is getting spark. Here is a link for you to go to below:

https://www.2carpros.com/articles/how-to-test-an-ignition-system

Please go through this guide and get to us and we will go from there.

Thanks,
Alex
2CarPros
Was this
answer
helpful?
Yes
No
Sunday, July 7th, 2019 AT 3:27 PM

Please login or register to post a reply.

Sponsored links