HOW DO I REPLACE MY PCV, CRANKCASE VENT HOSE AND CONNECTOR?
2002 Ford Ranger • 168,000 miles
I have a 2002 Ford Ranger and I recently purchased part #2L5Z-6c324-CA from the dealership, to replace the PCV and it's hose/connector. The reason I need to replace the whole thing is because the tubing was colapsing, resulting in a failure to pass my recent SMOG inspection. The problem is that the tubing goes into the valve cover, about a foot or so? So, there isn't enough room at the back of the engine (firewall) to simply slide the whole thing out.
For what liter engine-you probably have to remove the valve cover to completely replace it-
When i start my truck i hear and ticking noise and it does NOT go away after it warms up or it does not go away at all. When i accelerate the ticking noise gets faster and when im ...
6 answers • 2010 Chevrolet Suburban • 143,000 miles
I have a 1999 Buick Regal with a 3.8 Series2 Vin K engine. It appears the engine has died after overheating with that GM problem of the intake manifold. I need to know what engines & ...
2 answers • 1999 Buick Regal • 125,500 miles
If i took out my 91 toyota carolla engine what other cars would it be compatible with?
4 answers • 1991 Toyota Corolla
1990 Toyota Camry mileage: 150,000. 1. The oil warning light is on. 2. There are four quarts of oil in the car. 3. The oil filter is dry. 4. The engine sounds rough. 5. There is noise ...
3 answers • 1990 Toyota Camry • 150,000 miles