CYLINDER HEAD

While Putting The Valve Cover Back On A New Rebuilt Engine To Be Installed In My Older S10 A Bolt Snapped Off. The Bolt Head Snapped Off So...

I Took Down A 89 Vette With Aluminum Heads Today With A Blown Head Gasket. I Noticed That The Three Water Ports At The Top And Bottom Of The...

Took 1995 2.5 24v Probe To Local Garage To Fit New Oil Filter And Oil Change. They Fitted The Wrong Filter : ( Engine Overheated, Water...

My Coolant Disappears 5 Minutes After Driving And My Oil Pressure Light Comes On Once I Get To About 15 Mph. I Checked The Oil And It Was...

I've Changed The Coolant W/a Better&higher Quality Coolant & Replaced Therm( 180 Degrees)-but The Was"supposed Work Done On Heads Prior To...

Engine Cooling Problem 2001 Hyundai Sonata 6 Cyl Wheel Drive Type Unknown Automatic 75,000 Miles I Am Not A Mechanic But Have Had...

I Have A 97 Jeep Grand Cherokee Laredo 4.0 6cly That Has An Unthredded Hole Between The Two Back Headbolts On Drivers Side And Coolant...

Smells Problem 1997 Dodge Intrepid 6 Cyl Front Wheel Drive Automatic I Took My Mother Out Of Town, Its Very Cold Outside Right Now And...

My Van Was Frozen The Other Night And Now Has A Leak Coming From The Front Of The Head In Between The Injectors There A Threaded Hole And...

I Did A Head Gasket Job On This Vehicle. Took The Heads For Resurfacing To A Machine Shop.I Had Set Up Timing As Required. Before I Pulled...