CYLINDER HEAD GASKET REPLACE/REMOVE

I Coated Both Sides Of The New Head Gasket With Permatex High Heat Copper Gasket Sealant And Made Sure The Mating Surfaces Were Spec Clean...

Engine Mechanical Problem 1989 Toyota 4runner 6 Cyl Four Wheel Drive Automatic 160 Th Miles Hello, This Engine Before I Changed Bad...

Can You Tell Me The Order And Torque To Be Used When Replacing The Head Gasket And Tightening The New Tty Bolts?

Long Diatribe So There's A Donation:-) A Timing Belt Idler Pulley Bolt Sheared Off And Made A Pretty Total Mess Out Of The Engine. The Bolt...

I Am Replacing The Head Gasket On My Car And I Need To Know If The Cam Needs To Be In A Certain Position Be For Removing? If Not Can I Just...

My Car Listed Above Is A 1994. I Have Completed Replacing The Head Gasket And Head Bolts. From The Kit, I Have Replaced The Valve...

I Did Not Take A Pre Picture Of This Before I Took It Off Replacing My Head Gaskets. This Is The Only One I Cannot Remember Where It Goes...

How To Remove The Heads On Passenger Side?

A 2.3l Accord Came Into Shop; Heater Hose From Engine To Heater Core Split And Leaks Under Pressure From Gauge. Customer Drove Vehicle Not...

Pickup Stopped Running Two Blocked From Home. After Cooling Down Noticed No Water In Radiator. Checked Dip Stick And Water Was In Oil. This...