CAMSHAFT

I Have A 2004 Nissan Sentra 2.5 Ser Today It Failed To Start, I Ran A Scanner On It It Said It Was A Cam Positioning Sensor After About...

I Have A 1996 Chevrolet Z71 305 It Started Bucking So I Pulled The Codes And It Said The Cam Shaft Positioning Sensor Was Bad So I Changed...

I Need To Know When To Change The Timing Gear, Also Is It A Belt Or Chain On My 1.2 Ibiza 2004

I Was Preparing To Change The Timing Belt So I Pulled The Timing Belt Cover Off. Was Lining Up Notches By Turning Crank With The Belt On. As...

2002 Other Daewoo Models I Have Changed The Cam Sensor 3 Times And The Light Is Still Coming On. Why? What Can I Do, Or What Could...

I Have A 1994 Hyundai Scoupe With A 1.5 Sohc (3 Valve Per Cylinder) 4 Cylinder With 110,000 Miles. The Engine Had A Bad Head (several Bent...

Had A Bad Lifter On Cylinder 7. I Replaced All Lifters Now Cylinders 3, 5, 2, 8 Are Not Getting Oil To Rockers.

My Engine Light Has Been Coming On And Then Going Off For Several Months. It Is Also The Cam Shaft Sensor As I See Many People With This...

Transmission Problem 1997 Gmc Jimmy V6 Four Wheel Drive Automatic 98765 Miles The Cable To Lock The Front Wheels From The Actuator Isn...

The Lifters In My Car Have Been Sticking For Quite Some Time, Causing A Clicking Sound As I Run The Engine. The Oil Level Is Ok And Was...