SPONSORED LINKS

Will not Move when put into gear

Tiny
SLASHUGS
  • MEMBER
  • 1988 CHEVROLET 2500
  • 5.7L
  • V8
  • 4WD
  • AUTOMATIC
  • 148,789 MILES
When put in gear engine would stall then torque converter was replaced. Now engine runs when in gear, but does not go forward or backward. Grinding sound when attempting to shift into park.
Saturday, November 10th, 2018 AT 10:49 AM

1 Reply

Tiny
ASEMASTER6371
  • MECHANIC
  • 52,797 POSTS
Good afternoon.

If you hear grinding putting it into park, it sounds like the transmission is working.

Does the speedometer move up when you put it in gear?

Also, have someone look under the truck with it running and see if the driveshaft is turning.
It could be the transfer case.

Roy

https://www.2carpros.com/articles/automatic-transmission-problems
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, November 10th, 2018 AT 1:02 PM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...

Sponsored links