1993 PLYMOUTH ACCLAIM BROKEN VACUUM LINE

  • Tiny
  • Jaguar_God087
  • 1993 PLYMOUTH ACCLAIM

Air Conditioning problem
1993 Plymouth Acclaim 4 cyl Two Wheel Drive Automatic 140000 miles

I have recently removed the evaporator core from my plymouth. During removal it seems as though I broke 1 vacuum line. The vacuum line runs through the fire wall below the 2 heater core cooling hoses. I have no idea were this line is located under the hood of the car, and I don't know were it connects inside the care. I really need to know how to repair this please help.



http://www.2carpros.com/forum/automotive_pictures/538823_photo_1.jpg



http://www.2carpros.com/forum/automotive_pictures/538823_photo2_1.jpg



This is a picture of the vacuum line im talking about. one thing im also wondering is. Does this hose have a place within the unit that attaches to the main ac dash control? I have 1 hose missing in the unit it might seem? However there is 1 broken black vacuum line on it.

and before I forget here is a picture of the main unit. If the empty slot is for 1 house, were does it connect? basiclly I want to know how to hookup each line and to were.



http://www.2carpros.com/forum/automotive_pictures/538823_photo3_1.jpg

Do you
have the same problem?
Yes
No
Monday, June 14th, 2010 AT 7:15 AM

1 Reply

  • Tiny
  • Jack42
  • MEMBER

That would be the source vacuum for the dash controls. The underhood end usually hooks to a nipple on the brake booster fitting on Chryslers. It may have a vacuum resevoir under the hood(round ball) if so it will hook to that. The underhood vacuum diagram will show where it attaches.

Was this
answer
helpful?
Yes
No
Monday, June 14th, 2010 AT 4:27 PM

Please login or register to post a reply.

Other Vacuum Line Questions