IF YOUR LIGHT WORKS ON HIGH BUT NOT ON LOW, OR VICE VERSA THEN THE PROBLEM IS MOST LIKELY A BAD HEADLIGHT BULB. If that's been ruled out, try this:
Unplug the wire connector at the left headlight assembly.
With the headlights turned ON there should be power on the
WHT/DK BLU wire with the headlights on LOW/DIM.
There should be power on the WHT/PNK wire with the headlights
If not, check for power on these same wires (same colors) at the
TOTALLY INTEGRATED POWER MODULE located on the left
side of the engine compartment (fuse box).
If there is power at the totally integrated power module but not at the headlight connector
then there is a open in the wire that powers the light that does not work. You'll have to trace the wire to find the open.
Let me know what you find.
Saturday, July 26th, 2014 AT 11:26 AM