1992 Mercury Sable Turn Signals not working

Tiny
BRUCE ANTHONY
  • MEMBER
  • 1992 MERCURY SABLE
Electrical problem
1992 Mercury Sable 4 cyl Front Wheel Drive Automatic 100k miles

Checked fuse, replaced flasher, replaced turn signal switch. Turn signals will not work, 4 way flashers work. Front turn signals work manually (flipping the switch up and down) only when headlights are on. The back will not work at all, and the fronts only with the headlights on.
Do you
have the same problem?
Yes
No
Thursday, December 11th, 2008 AT 3:38 PM

1 Reply

Tiny
BLUELIGHTNIN6
  • EXPERT
Hello
Thanks for the donation

You need to check the connector pins on the housing that contains the signal switch and the headlight switches that connect to the signal light switch. These pins can come loose fron the circuit board they are soldered to and sometimes need to be repaired or housing needs to be replaced.

Hope this helps.
Thanks for using 2carpros. Com!
Was this
answer
helpful?
Yes
No
Thursday, December 11th, 2008 AT 9:07 PM

Please login or register to post a reply.

Recommended Guides