2003 Mazda Truck

Tiny
MICHAEL47V5
  • MEMBER
  • 2003 MAZDA TRUCK
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 720,000 MILES
I ran out of gas and had to push the fuel pump reset. My truck now has a problem running or sometimes wont start. Do I just need to change the fuel filter?

Updated 12/26/08

I have a Mazda 2003 B3000 pick up. I changed the fuel filter and the fuel pump. I have no power going to the fuel pump. All the fuses are good and the reset button is reset. Why am I not getting power to the fuel pump?
Do you
have the same problem?
Yes
No
Saturday, April 12th, 2008 AT 9:21 PM

2 Replies

Tiny
MHPAUTOS
  • EXPERT
Hi there,

I would recommend that you change the fuel filter and run a can of good quality fuel system cleaner into the tank as well, more than likely the filter has picked up a fair amount of muck that normally stays at the bottom of the tank.

Mark (mhpautos)
Was this
answer
helpful?
Yes
No
Sunday, April 13th, 2008 AT 12:05 AM
Tiny
MHPAUTOS
  • EXPERT
Hi,

Can you please post the model of your vehicle so I can check out the exact wiring schematic and see how the pump sources its power.

Mark (mhpautos)
Was this
answer
helpful?
Yes
No
Saturday, December 27th, 2008 AT 5:09 PM

Please login or register to post a reply.

Related Inertia Switch Content

Inertia Safety Switch Location
VIDEO

Recommended Guides