1993 Lincoln Town Car Rear window removal

Tiny
KEBELL41
  • MEMBER
  • 1993 LINCOLN TOWN CAR
  • V8
  • 2WD
  • AUTOMATIC
  • 228,500 MILES
I am trying to replace the regulators in both rear windows. The attacchment point of the window hangs over the top of the regulator thus keeping me from removing the regulator. I'm not sure what or how to move the window enough to get out the regulator. Any help would be great.
Do you
have the same problem?
Yes
No
Sunday, May 24th, 2009 AT 6:37 PM

4 Replies

Tiny
DOCFIXIT
  • EXPERT
Hi
Have you drilled the three holes in door to acesss regulator attaching screws?
Let me know
Thanks for donate
Was this
answer
helpful?
Yes
No
Monday, May 25th, 2009 AT 12:24 PM
Tiny
KEBELL41
  • MEMBER
I have removed all the rivets. All that is left are the two bolts at the top of the regulator. It is loose but won't go out past the bottom of the glass.
Was this
answer
helpful?
Yes
No
+2
Monday, May 25th, 2009 AT 12:32 PM
Tiny
DOCFIXIT
  • EXPERT
O.K.
On the Town car you do not drill out rivets. You drill three 1/2 in. Holes to remove mounting bolts then remove assembly from drum housing. Guess you can rivet it back. The lower right rivet is your reference point Go up 4 5/16 in. Then over 1 in. First hole.
Go up 3 17/64 in. Over 3 1/8 in. Second hole.
Go up 1 25/64 in. Over 1 11/16 in. Third hole.
Remove bolts, remove REG. From mount then remove through hole. Remove from drum and raise window by hand and secure. Repeat steps in rev order to install.
Was this
answer
helpful?
Yes
No
Monday, May 25th, 2009 AT 12:57 PM
Tiny
KEBELL41
  • MEMBER
Thanks a lot!
Was this
answer
helpful?
Yes
No
Monday, May 25th, 2009 AT 3:12 PM

Please login or register to post a reply.

Sponsored links