SPONSORED LINKS

2000 Honda Odyssey Rotors

Tiny
KAJAVED
  • MEMBER
  • 2000 HONDA ODYSSEY
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 151,000 MILES
How can I take off my front rotors. I took off the brake pads, caliper and caliper holder and I also managed to unscrew the two phillips screws which holds the disc. I tapped the disc with hammer so many times but all in vain. Any suggestion how can I take off my rotor. I also tried to put bolts where I unscrewed the philip screws. Please help me out in this.
SPONSORED LINKS
Friday, May 22nd, 2009 AT 10:42 PM

3 Replies

Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
Detach and remove two 6-mm disc retaining screws. Install two 8 x 1.25 x 12-mm bolts in existing holes. Alternately turn bolts 2 turns at a time until disc can be removed from hub.
Was this
answer
helpful?
Yes
No
Wednesday, April 21st, 2021 AT 1:51 PM
Tiny
KAJAVED
  • MEMBER
  • 4 POSTS
Hi
Thanks for your reply. I broke the bolts inside while I was trying to put the bolts in to pull out the rotors. Once the disc in off, removing broken bolts will be lot easier. Should I thread new holes or try to thread the previous hole where the broken bolts are?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, April 21st, 2021 AT 1:51 PM
Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
Should Fix old one if possible
Was this
answer
helpful?
Yes
No
Wednesday, April 21st, 2021 AT 1:51 PM

Please login or register to post a reply.

Related Brake Rotor Content

Rotor Stuck on Hub/Axle
GUIDE
Rotor Stuck on Hub/Axle
Much like a rear brake drum that gets stuck to the axle flange, a brake rotor is subject to the same type of problem due to the fresh metal on both the brake rotor and the...

Sponsored links