Timing belt

Tiny
BUTCH SWICKARD
  • MEMBER
  • 1989 HONDA CIVIC
  • 4 CYL
  • 2WD
  • AUTOMATIC
  • 190,000 MILES
I have a 89 Honda civic lx 1.5 liter I need to know how to put it in time the timing belt
Thursday, January 13th, 2011 AT 1:38 AM

9 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
See below:
Was this
answer
helpful?
Yes
No
Thursday, January 13th, 2011 AT 1:51 AM
Tiny
BUTCH SWICKARD
  • MEMBER
  • 10 POSTS
Do u have to have number one cylinder up and u just half to have the cam in the up position and which line do I use on the crank pulley
Was this
answer
helpful?
Yes
No
Thursday, January 13th, 2011 AT 1:59 AM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Put number one piston on it's compression stroke and line the cam and crank as illustrated on picture.
Was this
answer
helpful?
Yes
No
Thursday, January 13th, 2011 AT 2:25 AM
Tiny
CAR BRAKER
  • MEMBER
  • 1 POST
  • 1987 HONDA CIVIC
  • 143,000 MILES
87 honda civic 4wd wagon, timing belt broke while driving down dirt road bout 50km/hr. What are chances of engine damage? Rolled car to safe pullover spot, then towed it home w/my van. Home only couple kms away back up hill. Thanks
Was this
answer
helpful?
Yes
No
+1
Sunday, January 5th, 2020 AT 5:50 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
50/50. Remove the valve cover and check the valve clearances. If any has excessive clearance, it is bent.

Turn piston to TDC and then turn it away 20 degrees before you attempt to turn the camshaft.
Was this
answer
helpful?
Yes
No
Sunday, January 5th, 2020 AT 5:50 PM (Merged)
Tiny
STARO55
  • MEMBER
  • 3 POSTS
  • 1986 HONDA CIVIC
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 100,000 MILES
I need to kinow how do you know to set the timing if there are no marks, How do you set the timing then?
Was this
answer
helpful?
Yes
No
+2
Sunday, January 5th, 2020 AT 5:50 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
Hi staro55,

You meant the ignition timing mark or timing belt marks?
Was this
answer
helpful?
Yes
No
-2
Sunday, January 5th, 2020 AT 5:50 PM (Merged)
Tiny
STARO55
  • MEMBER
  • 3 POSTS
I mean the timing belt marks, how do you set it if there's no mark on the wheel?
Was this
answer
helpful?
Yes
No
+2
Sunday, January 5th, 2020 AT 5:50 PM (Merged)
Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
If there is no mark on the pulley, you would have to gauge the TDC of piston with the aid of a screwdriver down the plug hole.


https://www.2carpros.com/forum/automotive_pictures/192750_TimingMark86Civic_1.jpg

Was this
answer
helpful?
Yes
No
+6
Sunday, January 5th, 2020 AT 5:50 PM (Merged)

Please login or register to post a reply.

Sponsored links