SPONSORED LINKS

From one day to next my turn signals stopped working. No light on dash, no flashing sound, no light outside.

Tiny
CALIMOM6
  • MEMBER
  • 1996 CHEVROLET LUMINA
  • 6 CYL
  • AUTOMATIC
  • 75,000 MILES
We checked the bulbs, the fuses and changed the flasher. Still not working Did notice that the hazard switch seems to be pushed in all the way or its broken. Could this be the problem because the flasher said it was a combination flasher.
Sunday, August 10th, 2014 AT 8:13 AM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check fuses in pic and then have scanned it may be the module or the hazard switch. You can check the yellow and green wires leaving the t/s switch to see if power is going out if it is then it's a ground problem or maybe abroken wire.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, August 10th, 2014 AT 8:34 AM
Tiny
CALIMOM6
  • MEMBER
  • 2 POSTS
Thank you for such a prompt reply. Hopefully this will help me.
Was this
answer
helpful?
Yes
No
Sunday, August 10th, 2014 AT 9:34 AM

Please login or register to post a reply.

Related Turn Signal Not Working Content

Turn Signal Problems
GUIDE
Turn Signal Problems
Turn signals are intended to help inform surrounding drivers of the vehicle's intended change in direction. Although there are a few different causes for signal failure...
VIEW MORE

Sponsored links