1999 Ford Windstar Hose location

The 2 pipes are on the rear wall of engine compartment and look like this ... where the adapter and plug are showing ...will be hoses on vehicle ..

Hello,
Thanks for your response.
I'm still a little confused though. In the picture you attached are both hoses heater inlet hoses? If not then which one is the HEATER INLET hose? I need to know this as this will be the location I have to install a Flush & Fill Tee from the Prestone Flush 'N Fill kit. (I also have an '87 Buick which I have used this kit on before and am confident that it works very well.)
Thanks for your help!

I don't have a diagram. But generally the one on the right is the inlet? Check that this one comes from thermostat.

Thanks again. I'll have to go out and take a look while I'm on my lunch break and there is still daylight! Lol If I can't find or "see" what you are talking about I'll write you back again.

Thanks again. I'll have to go out and take a look while I'm on my lunch break and there is still daylight! Lol If I can't find or "see" what you are talking about I'll write you back again.[/Quote:9a3ee0977d]

So I just took a look and I did find the two hoses. I am not sure if I saw the thermostat or not but I did see the hose the led to the top of the engine. Would it be under the throttle controls?

If the pipe your talking about is going to the back of the engine underneath the throttle body. And is from the left pipe of the heater core.I'm guessin this is the return. Where does the other pipe go to?

Do you see a coolant crossover tube bolted to the top of engine? This feeds water to inlet on heater core.