1994 Ford Ranger 4X4 does not engage

Tiny
NITTANITA
  • MEMBER
  • 1994 FORD RANGER
Engine Mechanical problem
1994 Ford Ranger 6 cyl Four Wheel Drive Automatic

Hi
I did all the tests you told me to do, Module checks out good, motor is good, also put new speed sensor still does not engage. I read there is a vacum hose might need to be replaced, can you tell where this is locate. I don, t know what to check after that, The hubs look good.
Do you
have the same problem?
Yes
No
Friday, August 7th, 2009 AT 11:39 AM

1 Reply

Tiny
RACEFAN966
  • EXPERT
Now there is no vacuum for this version of the 4x4 system. In 95 they started that. Now if you want we can walk through some tests but it will start with ohming the speed sensor (the one on the top of the rear differetial) then it will move to the module tests as these are the common problem for this system. Get back to me with what you would like to do.
Was this
answer
helpful?
Yes
No
Friday, August 7th, 2009 AT 11:51 AM

Please login or register to post a reply.

Recommended Guides