Code P1000-00 and code P1000-FF

2008 FORD
V8 • AUTOMATIC
Avatar
MB-POWER
  • MEMBER
  • 80 POSTS
the two above codes. can any one help on how to clear them?
every time any Ford scanned you will find one or both codes.
why ECU always keep this code and why only Ford cars ?
any advice.
thanks and best wishes.
Jul 4, 2017 at 6:03 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
STEVE W.
  • CAR REPAIR CONTRIBUTOR
  • 15,148 POSTS
P1000 means that all of the monitor testing is not complete. It usually is set when the battery is disconnected, someone did a code reset or if something like EVAP or O2 sensor testing has not finished. Take a look at the actual monitors and see which ones have not set. It is a Ford and Ford related only code, It will show up on Fords, Lincolns, Mazda, Jaguar.
Basically it means that the vehicle did not have a full drive cycle to set everything.
Jul 4, 2017 at 7:51 AM
Advertisement
Avatar
MB-POWER
  • MEMBER
  • 80 POSTS
thank you for great assistance.
have nice day.
Jul 4, 2017 at 8:47 AM
Avatar
STRAILER
  • CAR REPAIR CONTRIBUTOR
  • 54,199 POSTS
Please let us know what happens, we are interested to see what it is.

Cheers, Ken
Jul 5, 2017 at 2:35 PM