1991 Chevy Truck steering column ignition actuator

Tiny
DUSTYRBIELO
  • MEMBER
  • 1991 CHEVROLET TRUCK
  • V8
  • 4WD
  • AUTOMATIC
  • 244,000 MILES
I removed the shroud behind the steering wheel to replace the wiper switch in my 1991 CK pickup. I'm having trouble getting the actuator rod timed back together with the gear on the back side of the ignition switch. I've gotten it very close, but the cylinder won't lock or go into the accessory position. I'm not sure of just how to position the rod, gear and lock cylinder to re-mesh to get it all back together. I can't seem to find any mention or pictures of the procedure in any manuals. Your immediate help would be greatly appreciated as I need to get back to work!
Do you
have the same problem?
Yes
No
Friday, October 16th, 2009 AT 10:28 AM

1 Reply

Tiny
IMPALASS
  • EXPERT
Hello -

To better assist you please be more specific on your model. Is it a C1500, K2500 etc and what is your engine size in liter?

Also, please give me the 8th digit of your VIN

We will do the best we can here but sometimes the manual isn't specific on this. But we will certainly try!
Was this
answer
helpful?
Yes
No
Friday, October 16th, 2009 AT 8:59 PM

Please login or register to post a reply.

Sponsored links