1998 Chevy Cheyenne replacing drivers door handle

Tiny
BSTRICKLAND
  • MEMBER
  • 1998 CHEVROLET CHEYENNE
  • 6 CYL
  • 2WD
  • MANUAL
  • 68,520 MILES
Is there a place that I can get info on taking the door panel off and on. What tools that I am going to need. Do I need to buy new clips to put the panel back on. Have the window handle off that was pretty easy, got the new handle to open just need more info before I start this project. Thank You
Do you
have the same problem?
Yes
No
Friday, March 14th, 2008 AT 2:39 PM

2 Replies

Tiny
RHALL77
  • MEMBER
Some of those panels lift straight up on GM. Make sure you dont pull straight out and damage it. Remove all screws, mark where they go. Pry the door panel out a little and see if you can see in there. You will be able to tell if the door should be lifted straight up or not.
Was this
answer
helpful?
Yes
No
Friday, March 14th, 2008 AT 2:52 PM
Tiny
BSTRICKLAND
  • MEMBER
Thank you for your reply. Will I need to get new clips to put the door panel back on or will I be able to use the old ones?
Was this
answer
helpful?
Yes
No
Friday, March 14th, 2008 AT 5:03 PM

Please login or register to post a reply.

Recommended Guides